PRESS TEAK LIGHT CONDUIT FITTINGS
Home » Conduit Fittings »
Press Teak Conduit Fittings are budget conduit fittings that are mainly used for light performance applications like surface wiring. These are majorly used for conduit wiring where there is no pressure on the network like in false ceilings. These are competitively-priced to give you the best quality at a great price.
PT LIGHT CONDUIT FITTINGS
elbow
An elbow is a type of pipe fitting that changes the path of the pipe by 90 °. It is very helpful to change the direction of the conduit line where it is needed.
tee
A Tee is a T-shaped pipe fitting with lateral outlets. It is used to connect 3 different pipes, which are at an angle of 90 °, to the neighboring one. It is generally used when you don’t need a connection point for ceiling roses and bulb holders.
Coupling
A coupling is one of the simplest conduit fittings. It is like an adapter that allows you to connect two different pipes and extend or continue the conduit line.
bend
A bend is a type of conduit fitting that changes the direction of the pipe by 90 ° in a concealed wiring system. It works very similar to an elbow used for open wiring. It gently changes direction to allow easy pulling of electrical wires during concealed wiring.
Saddle
A saddle is used to fix or mount the conduit wiring network with a solid surface so that the setup remains intact in its place. There are generally four types of saddle: patti saddle, saddle base with screw, lock saddle, and push saddle. Basically, they differ in the way they clamp the conduit pipe with them. But wire clips are now widely used.
Junction boxes
Junction boxes can be used to create connection points and provide mounting support for bulb holders and ceiling roses. Apart from that, they facilitate the reconfiguration by providing the passage to pull the wires in the concealed wiring system. There are two types of junction boxes: deep junction boxes and junction boxes. They differ in the size of the case. A deep junction box has a larger enclosure space, which is why they are preferred for concealed slab wiring.
Reducer
As the name indicates, a reducer is used to reduce the size of conduit from larger to smaller one as needed. They are compatible with the larger pipe at one end and with smaller one at the other end. It is particularly suitable for dividing a larger pipe into several smaller pipes in different directions. In this case, it makes much economic sense to use the same larger pipe throughout.
Extension Ring
Often, you may encounter that your existing junction box is shorter for your current application requirements. For this, you can use the extension ring during the wiring process to adjust its size according to current requirements.
Female bush adapter
Female bush adapter is a type of conduit fitting that connects PVC pipes to distribution boxes without the use of a flexible pipe. It has threading for tightening or loosening the attached upper part. The female bush adapter is fixed with DB boxes and pipes, and the electrical wiring is passed through the passage they create.
